[Shotimes] Re: electronic brake bleeder

[Alan Fanning]

I started making a pressure bleeder a year or two back, using some plans off
the web. Said plans included use of a spare OEM brake reservoir cap and
adding a fill tube through the cap. Not sure what pressure the OEM cap is
good for, but had I finished the project it certainly would have been
Taurus/Sable specific.

    Alan

> If/when Motive Products comes up with a Ford-specific adaptor, it would cut
> the setup time dramatically, as the time is now spent in getting the adaptor
> chained and tightened on the m/c. Two-minute job for me now that I have the
> drill down. Still a couple of spots on the driveway from blue ATE as I was
> getting the hang of it!!
> 
> Ron Porter