[Shotimes] Re: hood strut relocation kit for strut tower brace

[Ron Porter]

Just looked. There are a lot of holes in a stock hood. There are 11 small
holes along the leading edge, then there are 4 long slots a few inches
inside the leading edge. Should be no trouble.

There are a ton of cars out there with factory prop rods, so there may be
one that even looks/works better than that Cobra setup.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Ryan M Dudek
Sent: Wednesday, September 03, 2003 11:46 AM
To: Ron Porter; fwhittle@mindspring.com; shotimes@autox.team.net
Subject: RE: [Shotimes] Re: hood strut relocation kit for strut tower brace


Yes,
We use a proprod off of a mid90s Mustang (Cobra at that...hehe) for Tara's
cowl hood on the Opal Frost car.  Works great, but from what I recall, there
isn't a hole in the stock hood to hold it?  If I had a stock hood around I'd
look, but that is at least something to be careful about.

Ryan Dudek
98 Black
94 Opal Frost ATX