[Shotimes] Fw: Price Reduction on SHOnut Hybrid Ceramic Throwout bearings

Bruce Malachuk bmalach1@nycap.rr.com
Wed, 3 Sep 2003 23:04:55 -0400


So Outta curiosity do the TOB Rev.B work pretty good for a decent amount
of time? Cuase my Opal Frost I hope got a new one when it got it's last
dealer installed clutch at 62k, and I'm at 90k now. I'll eventually be
putting one of Josh's ceramic ones in to that car when I go with a HD PP
and grabbier clutch.

Bruce Malachuk

94 Opal Frost MTX
93 Black ATX soon to be parts
93 Green MTX - black interior...a turd with wheels right now



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Tim Dahm
Sent: Wednesday, September 03, 2003 9:20 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Fw: Price Reduction on SHOnut Hybrid Ceramic
Throwout bearings


----- Original Message ----- 
From: "John Holowczak" <jeh4@worldnet.att.net>
To: <TechSHO@topica.com>
Sent: Wednesday, September 03, 2003 8:09 PM
Subject: Price Reduction on SHOnut Hybrid Ceramic Throwout bearings


> Noticed Josh lowered SHOnutPerformance.com's price on ceramic hybrid
> clutch release bearings from $105 to $95.  
> 
> There is a growing body of evidence that these work to prevent clutch
> finger wear, with 2 pressure plates coming back from the feild due to 
> 3.2 upgrades etc. and showing little finger wear with 30 to 32 K miles

> (Mark Mallory's car, and someone else from upstate NY).  Statistics
and 
> an article in SHOclub are hopefully forthcoming.  Also, John Hrinsin
and 
> Bizzy(SHOforum) pulled their transmissions for Quaife install, rebuild

> etc. and saw basically no finger wear in the 10 K mile range.
> 
> I can remember during the late 90's on SHOtimes clutches would be 
> pulled
> due to inability to release (clutch finger wear preventing full
release) 
> with as little as 20 or 25 K miles.
> 
> Speaking of which, can someone forward this message over to SHOtimes?

> I
> am no longer on both lists (TechSHO and occasional SHOforum are 
> enough!).
> 
> Thanks,
> 
> J Holowczak
> 
> --^----------------------------------------------------------------
> This email was sent to: timd@chartermi.net
> 
> EASY UNSUBSCRIBE click here: 
> http://topica.com/u/?b1dhxA.b3jnKs.dGltZEBj
> Or send an email to: TechSHO-unsubscribe@topica.com
> 
> TOPICA - Start your own email discussion group. FREE! 
> http://www.topica.com/partner/tag02/create/index2.html
> --^----------------------------------------------------------------
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes