[Shotimes] question #4 of 4 - suspension
James F. Ryan III
jryan@multitechmail.com
Wed, 10 Sep 2003 16:20:49 -0400
This one is scary. I had the usual thumping noises, from those crappy ES
bushings, each time I went over a bump. Periodically, I would crawl
underneath and shake the rear asb and I could see that the bushings were
slightly loose around the bar. But, the brackets were still mounted to the
body!!
Go to http://www.photoisland.com
Log In ID: av8r567@optonline.net
Password: 12345
Then select the "Suspension" album. (1 picture)
Thanks,
Jim Ryan
Wayne, NJ
'91 PLUS all white/mocha with fiberglass hood, rod shifter, & rear spoiler
255 Lph fuel pump, SHO Shop can & horn, 80mm MAF, S&B cone filter, SHO Shop
HiFlow Y-pipe & cat-back exhaust, SHO Shop LPM, SHO Shop underdrive pulleys,
SHO Shop HiRevs Jr clutch & steel billet LiteWeight flywheel, reinforced
engine & trans mounts, SHO Shop TQ limiters, SHO NUT aluminum SFBs, FPS 96
SHO front brakes, Carbotech F brake pads, Nooks full-body SFCs, Koni adj
struts, SHO Shop linear springs, 24mm FSB, 26mm RSB, SHO Shop steel f&r
STBs, Bridgestone Potenza RE-730 225/55-16, CATZ MSP fog lights, police
grille