[Shotimes] Sway Bar Help??

[Paul L Fisher]

I believe you should get a 26 mm rear. 28 will cause too much oversteer.

Someone on the list was selling a 26 not long ago. If not, find a '89 SHO in a 
boneyard and it should have the 26.
-- 

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 177K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley 
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus 
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30 
oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6


Quoting Matt Geer <shokid13@yahoo.com>:

> Hello Group!
>  
> I have a '94 SHO MTX. Due to poor handling characteristics I measured the
> sway bars and they are at 24mm in the front, and 23mm in the rear. Lots of
> understeer!
>  
> I would like to keep the 24mm bar in front, but I am looking for a 28mm for
> the rear... Any ideas on where to find a reasonably priced unit? Also, from
> what I have read this seems to be a good balance, any comments?
>  
> Thanks so much!
>  
> SHO Kid
> 
> 
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Shopping - with improved product search
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 


-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/