[Shotimes] Subframe Bushings

[Mike]

Actually the GenIII versions sold by Shonut are the way to go, unless you
want to go with reinforced ones.  I've got them and they are vastly superior
to the standard genI/II bushings.
Mike

----- Original Message ----- 
From: "Kenneth Epperly" <epperly1@optonline.net>
To: "DAVE" <cobraii976@sbcglobal.net>; "SHO" <shotimes@autox.team.net>
Sent: Thursday, April 15, 2004 5:10 PM
Subject: Re: [Shotimes] Subframe Bushings


> Fords replacement #
> F3DZ-5400155-A absorber
>  FIDZ-5400396-A absorber
> Different style no plastic sleeve, metal instead, one is top and the other
> is bottom. As of a few months back the original style was still available
> under the police package. Check with SHONut as he is most likely to have
> your best prices.
>         Ken
> ----- Original Message ----- 
> From: "DAVE" <cobraii976@sbcglobal.net>
> To: "SHO" <shotimes@autox.team.net>
> Sent: Thursday, April 15, 2004 7:43 PM
> Subject: [Shotimes] Subframe Bushings
>
>
> > Any suggestions here? I don't want to harm the ride it has but I don't
> want the wasted one's anymore. I got it on the hoist and lossened up the
> subframe and moved it around until I got it back to close. But it needs
new
> bushings bad. I'm open to suggestions.
> > Dave
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes