[Shotimes] Subframe Bushings

[Kenneth Epperly]

That is what the # are.

        Ken
----- Original Message ----- 
From: "Mike" <srfdude@cox.net>
To: "Kenneth Epperly" <epperly1@optonline.net>; "DAVE"
<cobraii976@sbcglobal.net>; "SHO" <shotimes@autox.team.net>
Sent: Thursday, April 15, 2004 8:49 PM
Subject: Re: [Shotimes] Subframe Bushings


> Actually the GenIII versions sold by Shonut are the way to go, unless you
> want to go with reinforced ones.  I've got them and they are vastly
superior
> to the standard genI/II bushings.
> Mike
>
> ----- Original Message ----- 
> From: "Kenneth Epperly" <epperly1@optonline.net>
> To: "DAVE" <cobraii976@sbcglobal.net>; "SHO" <shotimes@autox.team.net>
> Sent: Thursday, April 15, 2004 5:10 PM
> Subject: Re: [Shotimes] Subframe Bushings
>
>
> > Fords replacement #
> > F3DZ-5400155-A absorber
> >  FIDZ-5400396-A absorber
> > Different style no plastic sleeve, metal instead, one is top and the
other
> > is bottom. As of a few months back the original style was still
available
> > under the police package. Check with SHONut as he is most likely to have
> > your best prices.
> >         Ken
> > ----- Original Message ----- 
> > From: "DAVE" <cobraii976@sbcglobal.net>
> > To: "SHO" <shotimes@autox.team.net>
> > Sent: Thursday, April 15, 2004 7:43 PM
> > Subject: [Shotimes] Subframe Bushings
> >
> >
> > > Any suggestions here? I don't want to harm the ride it has but I don't
> > want the wasted one's anymore. I got it on the hoist and lossened up the
> > subframe and moved it around until I got it back to close. But it needs
> new
> > bushings bad. I'm open to suggestions.
> > > Dave
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes