[Shotimes] Steering strangeness

[bjshov8]

A few years ago I put a clutch in my 90.  When I finished but before I put
the hood back on I noticed that I could turn the steering wheel and the
engine shifted quite a bit.  So, I bought Aluminum SF bushings and installed
them.  The original rubber SF bushings were mush but with the Aluminum
bushings there isn't much room for the SF to move.



> Do you do anything special to guard against the SF shifting?  I'm
> thinking of using a permanent marker or paint to mark the mount
> points of the SF to the chassis.  Getting the SF restored to its
> previous setting would also avoid the need to get the car aligned
> again.