[Shotimes] Subframe Bushings

[Paul Nimz]

If you don't want the solid aluminum ones the best bet is the GEN 3 rear
subframe bushing.  Be sure to put them with the long way parallel with the
side of the car.

F6DZ-5400396-AA Upper Half
YF1Z-5400155-A Lower Half

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "Kenneth Epperly" <epperly1@optonline.net>
To: "DAVE" <cobraii976@sbcglobal.net>; "SHO" <shotimes@autox.team.net>
Sent: Thursday, April 15, 2004 7:10 PM
Subject: Re: [Shotimes] Subframe Bushings


> Fords replacement #
> F3DZ-5400155-A absorber
>  FIDZ-5400396-A absorber
> Different style no plastic sleeve, metal instead, one is top and the other
> is bottom. As of a few months back the original style was still available
> under the police package. Check with SHONut as he is most likely to have
> your best prices.
>         Ken
> ----- Original Message ----- 
> From: "DAVE" <cobraii976@sbcglobal.net>
> To: "SHO" <shotimes@autox.team.net>
> Sent: Thursday, April 15, 2004 7:43 PM
> Subject: [Shotimes] Subframe Bushings
>
>
> > Any suggestions here? I don't want to harm the ride it has but I don't
> want the wasted one's anymore. I got it on the hoist and lossened up the
> subframe and moved it around until I got it back to close. But it needs
new
> bushings bad. I'm open to suggestions.
> > Dave
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes