[Shotimes] Still stalling - Cleaned IAB

[Michael Piplani]

I followed the directions on the FAQ for cleaning the IAB.  Got it off with no
problems, but I did note that the ISC would not come off the IAB.  It is
'crimped' onto the IAB.  There was some fouling and I emptied a can of carb
and choke cleaner into the IAB, got lots of stuff out.  I couldn't move the
piston though.

The car started and it was idling for about 5 minutes (yah! :)    There a new
'rushing' noise and then she stalled.  Couldn't get her to idle after that.
Took a hard drive up and down the local highway.  Still wouldn't idle.
Disconnected the ISC, still wouldn't idle.

Any thoughts out there?  I'm concerned 'cause my IAB/ISC combo won't come
apart like described in the FAQ and pictured in my Chiltons.

Bruce Malachuk I'll trade you for a house call.

Mike Piplani
'94 ATX
Delmar NY