[Shotimes] Engine washing

[Carl Prochilo]

My pressure washer is 1800 psi.  The only reason I really care to do
this at some point is because the damn valve cover silver dollar
seals are leaking terribly.  But what I will be doing soon is
pulling the intake off, resealing those with some permatex and
putting it back together.  While it's all apart I'll give it a good
cleaning.  Otherwise very little reason for engines to get real
dirty down here.

About your ABS problem, it might not be that tough a nut to crack. 
Try this.

http://prochilo.myserver.org:2080/abs_codes.html
-- 
Cheers,
Carl Prochilo
1992 Ultra Red Crimson

DAVE said:
> Carl, In effect she did pressure wash it. What I was worried about
> the most was the volume of water she sprayed down it.
>
> Kris. I'll send my wife over to wash your car LOL.
>
> Don. It did dry out and it seems to be fine,
>
> The ABS light is still on and it's never been off since I owned the
> car. Someday I'll tear into that like when I do the struts which
> will be sooner then later.
>
> I've never belived in washing an engine. by the time they got dirty
> in the Cobra it was time to tear it out and go bigger. When my 410
> Small block devolped the oil leak I pulled it and built a Dart
> blocked 426 small block for it. Now If I can find the time to get it
> all back together.
>
> Dave. When it's dirty rebuild it.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes