[Shotimes] Oil in Plug wells, now in cylinders... removal?

[Bruce Malachuk]

Really shouldn't hut anything as long as the car starts back up. Once it
starts take it fr a nice long drive and  make sure that you give it a full
run thru the RPM range. You might want to pull the plugs again after running
it, and make sure none of the cylinders were running without a spark.


Bruce J Malachuk

*	94 Opal Frost MTX 
*	93 Emerald Green MTX 
*	93 Black ATX - parts 
*	95 Silver Frost ATX SE - SLO 


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Adam J. Green
Sent: Sunday, August 08, 2004 1:01 AM
To: SHOTimes
Subject: [Shotimes] Oil in Plug wells, now in cylinders... removal?

Hey all... I have (had) oil in the plug wells of my SHO, and while I had my
back turned researching the probelm that causes the oil in the plug wells,
my "head" mechanic took the plugs out, leaving the oil in the cylindars....
any ideas on how to remove this? I was gonna take the shop vac to it or
stick some clear hose down in there so I can see it get removed...


'94 MTX    www.geocities.com/greentaurussho
'65 Studebaker     www.epix.net/~ajgreen
AIM: GreenTaurusSHO
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes