[Shotimes] Dyno results posted

[Ron Porter]

That's a "different looking" set of Dynojet charts.

Anyway, upon reading the text, I'm assuming that those are "raw", and not
corrected numbers? In that kind of weather, corrected numbers will be more
meaningful. Hopefully, he gave you both the raw & corrected numbers.

The HP looks fine for 91-degree heat + humidity.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Carl Prochilo
Sent: Saturday, August 14, 2004 3:42 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Dyno results posted


http://tinyurl.com/57t6p

I was expecting a little more HP, maybe 5 or 6 based on comparisons with
others that have similar setup.  The ambient temp was 91 degrees.

The guy running the dyno was amazed at the consistency for each of the 4
pulls.  He said he does a lot of hot rods and has never seen the machine
produce these consistent results.

I will have to go back later when they get their A/F ratio measurement
device.  I need to know that information to see if the LPM needs to be
tweeked, which I believe it does.

All four pulls were done in 3rd gear.  Is that the correct gear to take
the measurements?

The car has
o  3.2L upgrade with 3.0L profile intake cams
o  port matching on the intake
o  77mm Pro-M MAF with SHOShop Can
o  UDPs
o  P+ Y-pipe and Walker Dynomax cat-back.
-- 
Cheers,
Carl Prochilo
92 Ultra Red Crimson