[Shotimes] Antenna Wrench

[Beisler Jonathon]

Joseph,

As was said earlier, I used a deep socket 14 mm.  Even with the deep head,
it was not long enough to place the ratchet into it because what was left of
my antenna stuck up through the square hole.  What I did was use a pair of
needle nose pliers, spread enough to catch the corners of the socket and
turned it with that.  In my experience, the nut was not on too tightly.
Once I got it loose, I used my magnet grabber thingy to pull the nut out.
Tightened the nut back the same way with the install and have never had any
problems.
Hope this helps.

JB