[Shotimes] Axle replacement progress?

[Dave Kegel]

You should not need an alignment after replacing an axle.

The strut assembly should swing out enough for you to slide the axle out
of the hub.

Dave Kegel

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Saturday, December 04, 2004 12:37 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Axle replacement progress?


Well, I couldn't find a 30mm deep easily, so I got a 1.25 semi-deep at
Discount/Advance for less than $7 - worked!
 
Before I go further, is there any method that won't require major,
immediate wheel alignment when the job's done?  (Or, better yet, no
wheel alignment?)
 
The LCA and tie rod are off, but the strut is still in place - exactly
how is the hub separated from the axle (keeping the above goal in mind)?
 
Thanks again,
 
Mark

-- 
Mark's Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.269 / Virus Database: 265.4.5 - Release Date: 12/3/2004
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes