[Shotimes] Axle replacement progress?

[Paul L Fisher]

I did mine without having to get an alignment. Just separate the knuckle
from the LCA and pull the knuckle out.

I got the socket from Autozone for free.


Paul L Fisher

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Mark Mucher
Sent: Saturday, December 04, 2004 12:37 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Axle replacement progress?

Well, I couldn't find a 30mm deep easily, so I got a 1.25 semi-deep at
Discount/Advance for less than $7 - worked!
 
Before I go further, is there any method that won't require major, immediate
wheel alignment when the job's done?  (Or, better yet, no wheel alignment?)
 
The LCA and tie rod are off, but the strut is still in place - exactly how
is the hub separated from the axle (keeping the above goal in mind)?
 
Thanks again,
 
Mark

-- 
Mark's Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.269 / Virus Database: 265.4.5 - Release Date: 12/3/2004
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes