[Shotimes] Axle replacement progress?

[Mark Mucher]

That's what I figgered, but Krazy Geo suggested dropping the strut at the
same time.

Someone else (I think) suggested separating the bottom of the strut from the
knuckle, and I figgered that could mess it up too!

Thanks,

Mark
 

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Carl Prochilo
Sent: Saturday, December 04, 2004 6:08 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] Axle replacement progress?

Alignment is set from 2 basic places.  Tie-rod ends for toe, and moving the
top of the strut in the tower to set caster and camber.  Since the axle
replacement doesn't affect those settings, you won't need an alignment.
--
Cheers,
Carl Prochilo
92 Ultra Red Crimson

On Sat, December 4, 2004 1:36 pm, Mark Mucher said:
> Before I go further, is there any method that won't require major, 
> immediate wheel alignment when the job's done?  (Or, better yet, no 
> wheel
> alignment?)

-- 
Mark's Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.269 / Virus Database: 265.4.5 - Release Date: 12/3/2004