[Shotimes] Cam question...swap thereof

[Paul L Fisher]

OK. I re-phrase. There are no cam bearing inserts that can be replaced.


Paul L Fisher

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil

-----Original Message-----
From: Ron Porter [mailto:ronporter@prodigy.net] 
Sent: Sunday, December 05, 2004 12:05 PM
To: 'Paul L Fisher'; '1 SHOTIMES'
Subject: RE: [Shotimes] Cam question...swap thereof

Changing your story??? (j/k!!)

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Paul L Fisher
Sent: Sunday, December 05, 2004 12:15 PM
To: 'Frank "SHOrage" Costa'; '1 SHOTIMES'
Subject: RE: [Shotimes] Cam question...swap thereof


There are no cam bearings.


Paul L Fisher

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Frank "SHOrage" Costa
Sent: Sunday, December 05, 2004 1:22 AM
To: bjshov8; 1 SHOTIMES
Subject: Re: [Shotimes] Cam question...swap thereof

Can i reuse the cam bearings from the 3.2 then? how much are cam bearings 
for these suckers?


Frank



----- Original Message ----- 
From: "bjshov8" <bjshov8@comcast.net>
To: "1 SHOTIMES" <shotimes@autox.team.net>
Sent: Sunday, December 05, 2004 1:52 AM
Subject: Re: [Shotimes] Cam question...swap thereof


> It will probably not work.  The valve seats in the heads, the valves
> themselves, the buckets, the shims, the cams, the cam journals- all add up
> to determine the valve clearances.  If you change any one of those 
> elements
> you can throw off the valve adjustment- especially if you move a cam to a
> new set of valves.  Now you might just get real lucky but I would suspect
> that you will have to change some or all of the shims.
>
>
>> Can i theoretically just swap all of the cam works? Such as the cam,
> shims,
>> and all that straight to the 3.2 heads without worrying about a valve
>> adjustment?
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes