[Shotimes] ATX symptoms (semi OT)
Alan Fanning
Awfanning@earthlink.net
Sat, 31 Jan 2004 19:11:03 -0800
Don't overlook the fact that the strength of the solder drop significantly
well before it melts. I would recommend using silver braze (AKA silver
solder) that melts at 100F-1100F. You have no worries with that and it is
not hard to use with a propane torch on small parts.
Alan
> Silver solder works fine since it has
> a 375 deg F melting point. If the atx fluid gets hot enough to melt the
> solder, the trans has already burned up anyway.
>
> Robert Bruce
> 93 atx