[Shotimes] TORX Size

[John J. Weidenbenner]

T-20 tamper proof or phillips head screw.

John W.

----- Original Message ----- 

From: <bobsteig@att.net>
To: "Justin Jones" <dr_jones35@hotmail.com>
Cc: <shotimes@autox.team.net>
Sent: Monday, February 09, 2004 6:47 PM
Subject: RE: [Shotimes] TORX Size


> Hi Justin,
> Thanks for responding.
>
> That is exactly my question, the 73 mm MAF apparently needs the sensor
from
> the original 55 mm MAF. Do you remember what size torx they were?
>
> Thanks, Bob
>
> >
> > not sure if it'll help but i had to use a set of tamper resistant torx
> > drivers to get my old MAF sensor off of my 55mm unit, the 73's don't
come
> > with the actual sensor. i haven't used the 73 on my stock airbox, as i
have
> > the SS CAI setup. hope that helps some...
> >
> > doc
> >
> > _________________________________________________________________
> > Get some great ideas here for your sweetheart on Valentine's Day - and
> > beyond. http://special.msn.com/network/celebrateromance.armx
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes