[Shotimes] TORX Size

[bobsteig@att.net]

John W, 
Thanks! Just what I needed. I'll get the T-20 driver. 

Best, Bob

> T-20 tamper proof or phillips head screw.
> 
> John W.
> 
> ----- Original Message ----- 
> 
> From: <bobsteig@att.net>
> To: "Justin Jones" <dr_jones35@hotmail.com>
> Cc: <shotimes@autox.team.net>
> Sent: Monday, February 09, 2004 6:47 PM
> Subject: RE: [Shotimes] TORX Size
> 
> 
> > Hi Justin,
> > Thanks for responding.
> >
> > That is exactly my question, the 73 mm MAF apparently needs the sensor
> from
> > the original 55 mm MAF. Do you remember what size torx they were?
> >
> > Thanks, Bob
> >
> > >
> > > not sure if it'll help but i had to use a set of tamper resistant torx
> > > drivers to get my old MAF sensor off of my 55mm unit, the 73's don't
> come
> > > with the actual sensor. i haven't used the 73 on my stock airbox, as i
> have
> > > the SS CAI setup. hope that helps some...
> > >
> > > doc
> > >
> > > _________________________________________________________________
> > > Get some great ideas here for your sweetheart on Valentine's Day - and
> > > beyond. http://special.msn.com/network/celebrateromance.armx
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes