[Shotimes] how to test cooling fan for 3.8?

[Paul Nimz]

If it has the EATC the fan should come on when the car is started and the CC
is in a mode where the A/C compressor should be on.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "Koper Jim" <jkoper@frankgates.com>
To: <shotimes@autox.team.net>
Sent: Wednesday, February 11, 2004 3:32 PM
Subject: [Shotimes] how to test cooling fan for 3.8?


> How does one test the cooling fan--for a 3.8 SLO? The SLO fan method of
> operation IS different than a SHO fan.
> The connector is a three prong/slot deal (which may be like the SHO. It's
> been months since I've messed with the SHO). I've seen some instructions
> that say to jump a wire from each slot (one at a time) to the positive
> battery terminal to see if it kicks on. In the 3.8's case the ignition key
> should be in the 'run' position, per the Helms.
>
> I'd like to rule out (or rule in the fan), but only proper hook-up will
> yield valid results. Thanks for the input.
>
> Jim Koper
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes