[Shotimes] 98 SHO Engine Failure

[James White]

Sounds like a whole lot of work to tear out and then tear down two bad
motors in order to get one good one!  And with all of the gaskets required,
maybe one out of a wreck would be cheaper and less time comsuming.

But you would, in either case, have to do a cam weld.

Wonder if a cam weld is less costly when the motor is out of the SHO?

I know the Gen IIIs have some really good points, but for me, I am getting
another Gen II MTX.

regards, Jim White - greensho@crown.net
Valparaiso, Indiana
'95 MTX - 279k - lots of mods
'93 MTX - 282k - few mods and starting to rust
buying a '95 MTX - 124k - lots of mods

----- Original Message -----
From: John J. Weidenbenner <johnjweid@charter.net>
To: Marcus <shodude@bellsouth.net>
Cc: <shotimes@autox.team.net>
Sent: Saturday, February 28, 2004 4:11 PM
Subject: Re: [Shotimes] 98 SHO Engine Failure


> Can you build a good engine out of two failed?
>
> John W.
>
> ----- Original Message -----
> From: "Marcus" <shodude@bellsouth.net>
> To: "John J. Weidenbenner" <johnjweid@charter.net>
> Cc: <shotimes@autox.team.net>
> Sent: Saturday, February 28, 2004 4:01 PM
> Subject: Re: [Shotimes] 98 SHO Engine Failure
>
>
> > The failures are on either bank and not intake or exhaust cam specific.
> > Valves, pistons, and probably head damage.
> >
> > Marcus
> >
> > ----- Original Message -----
> > From: "John J. Weidenbenner" <johnjweid@charter.net>
> > To: <shotimes@autox.team.net>
> > Sent: Saturday, February 28, 2004 4:12 PM
> > Subject: Re: [Shotimes] 98 SHO Engine Failure
> >
> >
> > > I have no inrest in the GIII, but I do have a question on the failure.
> > Does
> > > the same parts get ruined every time? Or does the failure sometimes
> > involve
> > > the other bank; head, pistons etc. ? What parts, specifically, are
> > > destroyed?
> > >
> > > John W.
> > >
> > > ----- Original Message -----
> > > From: "Peter Maggiacomo" <gtsrider@yahoo.com>
> > >
> > >
> > > > Hey Guys, found a 1998 SHO with engine failure.
> > > > Car is relatively close to me, otherwise I would'nt
> > > > bother with it.
> > > > It ran great right up till  very recent failure.
> > > > Guys mechanic said it has a holed piston.
> > > > I think it may be a notorious cam failure.
> > > > Any thoughts?
> > > > -Pete
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes