[Shotimes] Vacuum lines confusion??

[Michael Tulloch]

Hello All,

  I finishing up installing the replacement engine for
in my 1992 SHO MTX and have a few conections that I
have no idea where they connect to.  First I have on
the vacuum distribution line up by the fuse panel in
the the top right corner connection S/C not connected
and the Chilton book doesn' show where it goes.  Also
have a vacuum check valve just to the right of the S/C
connection needing a conection, a T-fitting for vacuum
on the bottom radiator support and a vacuum fitting
next to the idle air control motor which I think
connects to the T-fitting.  The cruise control servo
is connected, the evap cannister in the fender is
connected so I don't know where these above
connections go.  I also have a gray oval shaped
connector down below the intake snakes on the back
that needs a home, VAPS is connected, speedo cable
connected and plug at speedo on tranny connected.  

Any help would be appreciated, Michael.

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/