[Shotimes] Re: Timing belt replacement...water pump

[Kevin & Cheryl Airth]

If you need the o-rings separately.  Here are the part numbers:
Fat one goes on water cross over tube #E9DZ-8563-A
Skinny one goes on housing to block #E9DZ-8513-B

Does anyone have the generic size or part number?
.
.



> Don't remove any part of the pump until you can buy your replacement
parts.  Then you will know how much of the waterpump to remove.  It is best
in any event to replace the o-rings but they may be very difficult to find.
The gasket in the water outlet housing can be made from raw gasket material,
but the o-rings are a different story.