[Shotimes] 3.2 OverBore Questions

[Paul L Fisher]

No.


Paul L Fisher

1999 Ford Taurus SHO TR 66K - Kirk'ed 2/29/04.

 - Amsoil Series 2000 0W-30
 - Amsoil TS-124 Oiled Foam air filter

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Frank Costa
Sent: Thursday, July 01, 2004 10:34 PM
To: TaurusSHO
Subject: [Shotimes] 3.2 OverBore Questions

Hello comrades,

Is it possible to overbore to 3.3 and keep stock 3.2 pistons?
Maybe oversized rings?

I was thinking of a budget job here....
I am not sure if i want to spend 900 dollars on pistons from JE...

>From what i understand i will keep only the essential block plus pistons
and
crank and then replace the rest with my 3.0 parts.....is this true?

Should i keep anything outside of this?

Bottom line question.....what parts do i keep from the 3.2 since it seems
that this list would be smaller?

THANKS IN ADVANCE

Frank Costa and the "Silver Bullet"
89 Titanium Grey

MODS-
Monroe Sensatrack Struts
Moog Cargo Coils All Around
Updated Front Swaybar Endlinks
Polyurethane Rear Swaybar Endlinks
Solid Delrin Subframe Bushings
Directional Italian SLicers
Bridgestone HP50 Tires All Around
Subframe Connectors
Rod Shifter
Performance (RACTIVE) Shift Knob [ Good For 25 HP]

http://www.brothersofmetal.org/frank.html
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes