[Shotimes] 96 SHO Brakes

[Paul Nimz]

AFAIK Amico is the OEM manufacturer of the GEN 3 rotors.  On my '97 I
replaced the OEM ones at 80k with some AZ Amico.  Never had a problem with
the originals nor the replacements.  I keep the originals for back up.
There is one rear on the rear of my '93 now.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "Bob Gervais" <BobGervais@cox.net>
To: "bjshov8" <bjshov8@comcast.net>; <shotimes@autox.team.net>
Cc: <v8sho@v8sho.com>
Sent: Wednesday, July 07, 2004 8:27 PM
Subject: Re: [Shotimes] 96 SHO Brakes


> I've used the Aimco (more expensive) rotors from Autozone without a
problem
> on a few cars.  My wife's 97 SLO is still running the PF pads and Aimco
> front rotors I put on before the Gingerman event in May.  No warpage at
all.
> Three or four people tracked the car that day, none of them were
> particularly nice to the brakes either.
>
> -Bob
> ----- Original Message ----- 
> From: "bjshov8" <bjshov8@comcast.net>
> To: <shotimes@autox.team.net>
> Cc: <v8sho@v8sho.com>
> Sent: Wednesday, July 07, 2004 9:22 PM
> Subject: Re: [Shotimes] 96 SHO Brakes
>
>
> > A slightly related question-
> >
> > What are some recommended manufacturers/stores to go to for rotors?  Is
> > there such a thing as a rotor that is resistent to warping?  Is there a
> > benefit to the cryo treatment?
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes