[Shotimes] Cooling Problem

[rcedelman@comcast.net]

Well, I just went and ran the EEC tests. Again, no codes, but that's fine as there's no codes for the fans, heh.

Anyway, the fans came on and I heard the higher speed, but it wasn't very loud at all, seemed kind of weak to me actually. I remember the higher fan speed being reasonably loud.

Anyone in the Kansas City area with an ATX SHO by chance?


> Rich:
>  Run the EEC-IV test. This will cycle the ATX fan thru it's different
> speeds. If you don't hear the higher speed you may have lost one of the 2
> fans. It may be the fan motor or the relay box. Can you find another ATX SHO
> to swap IRCM's? Is any fan running at all?
> .
> .
> 
> > I've got a 95 ATX which seems to have some cooling problems. It seems like
> the
> > fans never kick in to high speed at all. Aren't they supposed to do so
> when
> > you turn the a/c to max? If so, well then they don't... No codes are being
> > thrown at all either. I'm tempted to replace ECT and temp sender unit for
> > good measure, but I'm thinking it's more likely the IRCM.
> >
> > Any thoughts, suggestions?