[Shotimes] SHO engine in RWD

[Mark Nunnally]

> Oh yeah, as far as the gearbox goes... Do not use the 5-speed from a 3.0L
> Ranger, as they will not take the power from a SHO engine, they are
marginal
> at best with the Vulcan V6.

In specing out some stuff for doing a 3.2L SHO ranger last year, I recall
the M5R1 tranny from the ranger having a 260 ft/lb torque capacity, should
be plenty for a n/a SHO motor.

You'll need to either turn the inside of the crank of the SHO, or get a
pilot bearing and turn down the OD to fit on the SHO snout.

mark