[Shotimes] pulling computer

[Steve Tatro]

Told ya.

;^)

Did I mention you now are ready for a Ted B. LPM?  When you get one, don't be surprised by the quick 1-2 shift including some wheelchirp (if desired).

Take care,

Steve Tatro
Red/Black '93 with 178k miles
Monroe, Ohio


-----Original Message-----
From: ROBERT SCHIRMER <1surferbum@msn.com>
Sent: Jun 26, 2004 2:33 PM
To: shotimes@autox.team.net, 'Jeremy' <jeremy@carrieandjeremy.com>, 
	Bruce Malachuk <bmalach1@nycap.rr.com>
Subject: Re: [Shotimes] pulling computer

Gentlemen

Thanks for the help- it was that damn bolt in the engine compartment that
hooks into the back of the computer that was holding it in Once I removed that
bolt, out she slid.

Bob
  ----- Original Message -----
  From: Bruce Malachuk<mailto:bmalach1@nycap.rr.com>
  To: 'ROBERT SCHIRMER'<mailto:1surferbum@msn.com> ;
shotimes@autox.team.net<mailto:shotimes@autox.team.net> ;
'Jeremy'<mailto:jeremy@carrieandjeremy.com>
  Sent: Saturday, June 26, 2004 1:40 PM
  Subject: RE: [Shotimes] pulling computer


  Spray the foam gasket on the top of the computer with a little silicone
  lubricant, wait a minute or two and the comp will slide right out easily.


  Bruce J Malachuk

  * 94 Opal Frost MTX
  * 93 Emerald Green MTX
  * 93 Black ATX - parts
  * 95 Silver Frost ATX SE - SLO


  -----Original Message-----
  From: shotimes-admin@autox.team.net<mailto:shotimes-admin@autox.team.net>
[mailto:shotimes-admin@autox.team.net]
  On Behalf Of ROBERT SCHIRMER
  Sent: Saturday, June 26, 2004 12:18 PM
  To: shotimes@autox.team.net<mailto:shotimes@autox.team.net>; Jeremy
  Subject: [Shotimes] pulling computer

  Guys

  I am trying to pull my H3Z computer out of my 93, and replace it with a
  D4U1 computer. My problem is that I can't get that old one out. Looking at
  the depth of the pins on the D4U1, I believe I have pulled it about 3/4 way
  out, but no amount of force I pull on it with will help the rest of the
way.
  I have enlisted the help of vise grips and all. Is this just a matter of
  wiggling it and pulling? I noticed the back side of the D4U1 computer has a
  built in nut.
  When I get this computer out, is the cable bundle held in place by a
screw??
    Thanks in advance
    Bob
  _______________________________________________
  Shotimes mailing list
  Shotimes@autox.team.net<mailto:Shotimes@autox.team.net>
  http://www.team.net/mailman/listinfo/shotimes<http://www.team.net/mailman/l
istinfo/shotimes>
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes