[Shotimes] 3.0 Cam measurements

[Fred George]

I'm just now starting the second 60K check. I need these cam lobe 
measurements, as well.

Fred
619.275.0222
'89 Gen 1 original owner

Bruce Malachuk wrote:

>With spring right around the corner I'm starting to pull my 3.2 outta the
>parts car. One of the first things I wanted to do was swap one of the sets
>of 3.0 cams I have to it. I have 3 pair of 3.0 heads with cams. I think all
>of them look unworn. My question is, is there a specific measurement I can
>do with a caliper to tell me which are the least worn set or what not. I
>kinda want to get the parts put aside and sell off all the stuff I don't
>need so that I can line everything else I need up for the swap.
> 
>I i can use 3.2 exhaust cams with the 3.0 intake cams right? I seem to think
>that was the case, but I could be wrong.
> 
>Thanks in advance to anyone that has a measurement that a cam should be at.
>I'm not looking for lift and duration, just overall measurement of the lobe
>so that I can gauge wear.
> 
>Bruce
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes