[Shotimes] ATX rev limiter

[Jason Hartberger]

Well then, shotimes.com needs to update their friggin' site... what else did
they get wrong?

Jason

----- Original Message -----
From: "Rick Glass" <rick@pitroadproducts.com>
To: "Jason Hartberger" <atanhartberger@mail.com>; "Shotimes Mailing List"
<Shotimes@autox.team.net>
Sent: Sunday, March 07, 2004 1:28 AM
Subject: Re: [Shotimes] ATX rev limiter


> The rev limiter hits at 3500...so it's right.
>
>
> Rick Glass
>    Nashville, TN
>    SESHOC
> '99 Silver 42k
>    Flowmaster Original 40's
>    3rd cat/resonator removed
>    Intake slighly modified (but not Porterized)
>    will be Kirk'd at the Southeast CamFest (August)
> ----- Original Message -----
> From: "Jason Hartberger" <atanhartberger@mail.com>
> To: "Shotimes Mailing List" <Shotimes@autox.team.net>
> Sent: Saturday, March 06, 2004 11:44 PM
> Subject: [Shotimes] ATX rev limiter
>
>
> > IIRC, isn't the neutral rev limit for the ATX set at 4500 RPM? I took my
> tach
> > needle off to replace my gauge faces and now when I get a correct idle
> tach
> > reading (~750 RPM), the rev limiter appears to cut in at 3500 RPM. I'm
not
> > sure if I just really messed the needle spring up, which I don't think
> > happened, or my computer hates me, which, knowing my luck, is quite a
bit
> more
> > likely. Is there any way I can fix this?
> >
> > As always, thanks for any advice.
> >
> > Jason
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes