[Shotimes] ATX rev limiter

[Rick Glass]

The rev limiter hits at 3500...so it's right.


Rick Glass
   Nashville, TN
   SESHOC
'99 Silver 42k
   Flowmaster Original 40's
   3rd cat/resonator removed
   Intake slighly modified (but not Porterized)
   will be Kirk'd at the Southeast CamFest (August)
----- Original Message ----- 
From: "Jason Hartberger" <atanhartberger@mail.com>
To: "Shotimes Mailing List" <Shotimes@autox.team.net>
Sent: Saturday, March 06, 2004 11:44 PM
Subject: [Shotimes] ATX rev limiter


> IIRC, isn't the neutral rev limit for the ATX set at 4500 RPM? I took my
tach
> needle off to replace my gauge faces and now when I get a correct idle
tach
> reading (~750 RPM), the rev limiter appears to cut in at 3500 RPM. I'm not
> sure if I just really messed the needle spring up, which I don't think
> happened, or my computer hates me, which, knowing my luck, is quite a bit
more
> likely. Is there any way I can fix this?
>
> As always, thanks for any advice.
>
> Jason
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes