[Shotimes] Re: Water injection (sort of)

[Paul Nimz]

Sorry for the previous confusing question.

I think this is right. For a 12% flow........


19 gph = .317 gal per minute

19 gph = 71915 cubic centimeters per hour = 1199 cc p minute

12% = 144 ccpm


Paul Nimz
'97 TR
'93 EG mtx





  ----- Original Message -----
  From: Paul Nimz
  To: `V6 SHOtimes ; `V8 sho@v8sho.com
  Sent: Thursday, March 11, 2004 10:36 AM
  Subject: Re: Water injection (sort of)


  Looking at the Aquamist parts page they have the injectors and give the flow
rates in ccs.  I have read that I need a flow rate of 10-15 % of my FIs.  I
believe the V8 uses 19lb FIs.  What would that be in a cc flow?

  Paul Nimz
  '97 TR
  '93 EG mtx


    ----- Original Message -----
    From: John Stout
    To: Paul Nimz ; `V6 SHOtimes ; `V8 sho@v8sho.com
    Sent: Wednesday, March 10, 2004 1:17 PM
    Subject: Re: Water injection (sort of)


    there is a guy on Ebay selling the Aquamist injectors, is that what you
need paul ??

    Paul Nimz <pnimz@v8sho.com> wrote:
      I'm planning on making my water injection system but using ethanol
instead.  My plan is to use an electric fuel pump and some sort of injector
that is placed immediately after the TB.

      Anyone have any idea where I could get some sort of injector that has a
threaded fitting on it? Does not have to be a fuel injector but it does have
to atomize the spray.

      I also need to know about what size would be needed. I plan on using
this on my '97 SHO and only when the IRM is operating.

      Thanks

      Paul Nimz
      '97 TR
      '93 EG mtx




----------------------------------------------------------------------------
    Do you Yahoo!?
    Yahoo! Search - Find what you're looking for faster.