[Shotimes] code 332

[Rick5638@aol.com]

Thanks again to all that posted on the EGR issue and the 332 code i was 
getting.
I pulled the throttle body off the car, cleaned out the nostrils and cleaned 
out the passage behind the alen screw on the back side of the intake. I put it 
back together last night, haven't had a chance to drive it yet but I'm sure 
the clogged nostrils were
the problem. I started the car and placed a hose on the EGR vacum connection, 
sucked through it and it killed the motor so I know the EGR valve is good. 
I'll post after a good 20 min. drive tomorrow to see if that CE is gone. 
Penetrating spray did the job on getting that alan screw plug out that wouldn't budge 
before.  
Thanks again,
Rick
95 silver ATX