[Shotimes] Modified 1995 MTX for sale

[Johnsho92]

Wow, Nice. How much are you asking for? Where do you
live again?

-John

--- Don McKinnon <dmckinnon@asttechlabs.com> wrote:
> Well it time for the 95 MTX to really go now! I've
> been in denial about
> letting it go and not really trying to sell it, but
> the AWA is on my case
> these days.  I've been a SHOtimer since 1996 and I
> just have no time in life
> to give it TLC. I'm hoping that there is someone out
> there with the "bug"
> that will take it and let it live on.  If not, I'm
> going to consider parting
> it out. Email me at dmckinnon@asttechlabs.com if
> interested in more info,
> jpgs, etc.
> 
> 1995 MTX White / Tan 93k miles:
> Complete 60k performed at 68k including all coolant
> hoses and filters.
> Interior and exterior not the best (FL Sun and
> Heat), needs elbow grease but
> can be fully detailed before sale is made. 
> Performed several modifications
> over the years:
>  
> Engine - Intake: SHO Shop Can, Horn, Conical filer,
> 80mm MAF, LPM,
> Crankshaft UDP, Stage 1 cams (installed during
> "60k"), SHO Shop Y-pipe.  It
> was a very strong stocker, 195HP and 193 TQ, 200hp
> when I added the 80mm MAF
> (Have dyno charts).
> 
> Tranny - Completely rebuilt at 41k miles when a good
> old TQ Strap rivet
> sheared when stock differential went open mode on a
> wet road and I missed a
> shift, strap cracked case and fluid was lost, I took
> no chances on the
> rebuild.  I added the Quaife LSD and old style SHO
> Shop competition clutch
> at the same time.
> 
> Suspension - Koni strut inserts with SHO Shop linear
> springs, 26mm rear
> anti-SB, 20.6mm front anti-SB, FPS shorty sub-frame
> connectors. Replaced
> lower control arms and outer-tie rod ends that have
> grease fittings at 55k,
> along with Energy Suspension poly bushings
> throughout suspension, except
> front anti-SB which is rubber.
> 
> Brakes and Wheels - Front "96" brake upgrade, 16x7
> American Racing Wheels
> AR-33 rims (~19 lbs) with 225/55 tires.
> 
> Misc. - Have many extra parts: New Spare Clutch
> (South Bend Clutch),
> A-pillar 3-Gauge Pod, Cassette/lighter Dash 2-Gauge
> panel, Front and Rear
> Strut Tower Braces, TQ Box H Brace, Felpro head
> cover gasket set, Accel
> Super Stock Spiral plug wires, Intake Runner
> phenolic spacer/isolators,
> spare big bored butterfly set (incorrect diameter
> plates installed), 17734
> SuperTurbo mufflers, ES poly front anti-SB with
> grease fittings.  
> 
> Don McKinnon
> 96 Black - Borla
> 95 MTX White/Tan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html