[Shotimes] Modified 1995 MTX for sale

[Don McKinnon]

Well it time for the 95 MTX to really go now! I've been in denial about
letting it go and not really trying to sell it, but the AWA is on my case
these days.  I've been a SHOtimer since 1996 and I just have no time in life
to give it TLC. I'm hoping that there is someone out there with the "bug"
that will take it and let it live on.  If not, I'm going to consider parting
it out. Email me at dmckinnon@asttechlabs.com if interested in more info,
jpgs, etc.

1995 MTX White / Tan 93k miles:
Complete 60k performed at 68k including all coolant hoses and filters.
Interior and exterior not the best (FL Sun and Heat), needs elbow grease but
can be fully detailed before sale is made.  Performed several modifications
over the years:
 
Engine - Intake: SHO Shop Can, Horn, Conical filer, 80mm MAF, LPM,
Crankshaft UDP, Stage 1 cams (installed during "60k"), SHO Shop Y-pipe.  It
was a very strong stocker, 195HP and 193 TQ, 200hp when I added the 80mm MAF
(Have dyno charts).

Tranny - Completely rebuilt at 41k miles when a good old TQ Strap rivet
sheared when stock differential went open mode on a wet road and I missed a
shift, strap cracked case and fluid was lost, I took no chances on the
rebuild.  I added the Quaife LSD and old style SHO Shop competition clutch
at the same time.

Suspension - Koni strut inserts with SHO Shop linear springs, 26mm rear
anti-SB, 20.6mm front anti-SB, FPS shorty sub-frame connectors. Replaced
lower control arms and outer-tie rod ends that have grease fittings at 55k,
along with Energy Suspension poly bushings throughout suspension, except
front anti-SB which is rubber.

Brakes and Wheels - Front "96" brake upgrade, 16x7 American Racing Wheels
AR-33 rims (~19 lbs) with 225/55 tires.

Misc. - Have many extra parts: New Spare Clutch (South Bend Clutch),
A-pillar 3-Gauge Pod, Cassette/lighter Dash 2-Gauge panel, Front and Rear
Strut Tower Braces, TQ Box H Brace, Felpro head cover gasket set, Accel
Super Stock Spiral plug wires, Intake Runner phenolic spacer/isolators,
spare big bored butterfly set (incorrect diameter plates installed), 17734
SuperTurbo mufflers, ES poly front anti-SB with grease fittings.  

Don McKinnon
96 Black - Borla
95 MTX White/Tan