[Shotimes] Differences between 3.0 & 3.2 engine harness?

[George Fourchy]

On Tue, 4 May 2004 10:30:29 -0400, Ron Nottingham wrote:

>Could a harness from a 3.2L ATX be used with a
>3.0L engine and ECU? Anyone with a good schematic of both systems? Or are
>the two way different?

I would "suspect" that the ATX harness would run the engine, but if it had a CE
light included, the light would be on, due to the absent transmission.  I am
certainly not a wiring harness expert.

Good luck with your attempt!!

George