[Shotimes] 60 pin connector tips

[Kirk Doucette]

I think your going to have to pull the entire unit out as a whole (connector
and pcm) then work on it, I would not worry too much about the harness
because the only thing you may wreck are the pins and they are on the pcm..

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Justin Schick
Sent: Monday, May 24, 2004 8:23 AM
To: shotimes@autox.team.net; TechSHO@topica.com; Kirk.doucette@verizon.net
Subject: RE: [Shotimes] 60 pin connector tips

Well sir you were right, I got the head cut off and then tried to punch
it through. I got it in as far as it'd go and I still couldn't pull the
plug off.

What's the best way to pull it off, and keep it in decent enough shape
to not need a new wiring harness?

What's holding the PCM in after I get the plug off?


Justin Schick
silver 92 SHO in KC MO
205k and counting quickly

>>> "Kirk  Doucette" <Kirk.doucette@verizon.net> 5/23/2004 11:34:46 PM
>>>
Don't cut the bolt head, unless you have another one handy. It's a
small
long bolt and has a cir-clip holding it.. I don't think it would work
anyway..

If it was me............  the PCM is junk one way or another now. So
pry it
off the pcm..

Kirk J Doucette
NESHOC President
Stormtrooper-97 White
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes