[Shotimes] Gen2 door on a Gen1

[kickinsho]

>I too, was confused the first time I took my '94 door panel off...but then
>again I stay confused...
>Hope this helps......

>Rick Glass


Welcome to the popular group.  Confused is a great state of mind..........
it's better than having to explain all of the time.    ;-)

Kris

'91 White Plus
'91 White Plus
'93 Ultra Red ATX

"Women Who Behave Never Make History"
----- Original Message ----- 
From: "Rick Glass" <rick@pitroadproducts.com>
To: "van Oss" <vanOss@centurytel.net>; <shotimes@autox.team.net>
Sent: Tuesday, May 25, 2004 9:35 PM
Subject: Re: [Shotimes] Gen2 door on a Gen1


> Since no one else offered any onfo about the way the handle attaches, I
will
> try.......The back of the G2 handle has a small offset tab that hooks on
the
> sheetmetal in the door and then the screw holds it in place......this is
the
> best way I can describe it from memory.....
> I too, was confused the first time I took my '94 door panel off...but then
> again I stay confused...
> Hope this helps......
>
> Rick Glass
>    Nashville, TN
>    SESHOC
> '99 Silver 48k (these freakin' things add up fast)
>    Flowmaster 40's
>    no "pre-muff"/no resonator
>    still not Kirk'd
> ----- Original Message ----- 
> From: "van Oss" <vanOss@centurytel.net>
> To: <shotimes@autox.team.net>
> Sent: Tuesday, May 25, 2004 8:08 PM
> Subject: [Shotimes] Gen2 door on a Gen1
>
>
> > I have a 91 that needs a right front door immediately.  I just got a
good
> > door from a Gen2.
> >
> > I think I can sort out the minor wiring difference (one of the
connectors
> is
> > different -- Gen1 has two conductors, Gen2 has four wires going into
three
> > terminals).  This is a winter driver so I don't care about having a Gen1
> > mirror on the left and a Gen2 mirror on the right.  My questions are
about
> > the INSIDE door handle:
> >
> > -- It is not obvious how the Gen2 interior handle is attached to the
sheet
> > metal.  Anybody know?
> >
> > -- Might I be able to swap in the Gen1 handle (and maybe the linkage)?
> >
> > -- If I can't swap the handles, I could live with having one door with a
> > Gen2 trim panel in an otherwise Gen1 interior.  Will I burn in hell?  I
> can
> > already hear Andy Angermeier saying "It's not stock!"
> >
> > Any advice welcome.
> >
> > VO
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes