[Shotimes] Lamp Out Module with Aftermarket Headlight Harness Mod

cmichaelo@optonline.net cmichaelo@optonline.net
Wed, 10 Nov 2004 13:11:16 -0500


Apparantly, http://www.danielsternlighting.com/tech/tech.html also sells the components (excl wires) for the wiring harness. His kit comes with fused fuse holders and extra-tough this and that. Sells for $55. So this is certainly more than elsewhere. But it may be worthwhile the extra $10-15?

Michael
94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
SHO items for sale: http://hometown.aol.com/cmichaelo/for_sale.html

----- Original Message -----
From: Kevin & Cheryl Airth <clubairth@peoplepc.com>
Date: Wednesday, November 10, 2004 12:03 pm
Subject: [Shotimes] Lamp Out Module with Aftermarket Headlight Harness Mod

> This is from a guy named Dick Carlson in 1999. I am surprised the 
> web pages
> are still valid!
> Here is the circuit diagram:
> http://www.fortunecity.com/silverstone/jensen/6/diag.htm
> 
> Here is a picture of way he did it.
> http://www.fortunecity.com/silverstone/jensen/6/harness.htm
> 
> I have done this mod and it works good.
> 
> If I did this again I would just build my own harness. Much 
> cheaper and you
> could use better relays and wire. This site has a good set of 
> instructionsfor building your own harness and other lighting mods 
> people do. Good
> discussion on picking relays and wire sizes. I think this should 
> have been
> stock from Ford. You NEED full voltage at the headlamps!
> http://www.danielsternlighting.com/tech/tech.html
> .
> .
> .
> 
> 
> 
> > I'd like it
> > thanks
> > Ian
> >
> > --- Kevin & Cheryl Airth <clubairth@peoplepc.com>
> > wrote:
> >
> > > Bob:
> > >  There is a wiring mode you can do which will keep
> > > the Light out monitor
> > > working for everything except the headlamps. You
> > > should be able to see if
> > > those are still working! Let me know if you want it
> > > and I will post it. It's
> > > a pretty simple mod.
> > > .
> > > .
> > > .
> > >
> > > > This upgrade does light the "light out" light. I
> > > have a black interior so
> > > I
> > > > took a triangle shaped piece of rubber roofing [no
> > > reason, had it lying
> > > > around]  and stuck it to the corner of the dash
> > > with double side tape.
> > > Can't see the
> > > >  light and the rubber piece is inconspicuous.
> > > >
> > > > Bob 93 MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes