[Shotimes] Lamp Out Module with Aftermarket Headlight Harness Mod

[Ian Fisher]

I saw that too. If you are going to all of the trouble
of building your own harness, you may want to first
check out:

http://faq.auto.light.tripod.com/

http://www.network54.com/Forum/216460

www.hidplanet.com/forums 


Search the FAQ's there for building harnesses. 

Perhaps even better, check out:

http://members.tripod.com/~hanker/headlights.htm

also don't miss the lampout diagram pic at:

http://members.tripod.com/~hanker/lampout.jpg



It's all hours of great reading. Def worth it though.

Ian

--- cmichaelo@optonline.net wrote:

> Apparantly,
> http://www.danielsternlighting.com/tech/tech.html
> also sells the components (excl wires) for the
> wiring harness. His kit comes with fused fuse
> holders and extra-tough this and that. Sells for
> $55. So this is certainly more than elsewhere. But
> it may be worthwhile the extra $10-15?
> 
> Michael
> 94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
> SHO items for sale:
> http://hometown.aol.com/cmichaelo/for_sale.html
> 
> ----- Original Message -----
> From: Kevin & Cheryl Airth <clubairth@peoplepc.com>
> Date: Wednesday, November 10, 2004 12:03 pm
> Subject: [Shotimes] Lamp Out Module with Aftermarket
> Headlight Harness Mod
> 
> > This is from a guy named Dick Carlson in 1999. I
> am surprised the 
> > web pages
> > are still valid!
> > Here is the circuit diagram:
> >
>
http://www.fortunecity.com/silverstone/jensen/6/diag.htm
> > 
> > Here is a picture of way he did it.
> >
>
http://www.fortunecity.com/silverstone/jensen/6/harness.htm
> > 
> > I have done this mod and it works good.
> > 
> > If I did this again I would just build my own
> harness. Much 
> > cheaper and you
> > could use better relays and wire. This site has a
> good set of 
> > instructionsfor building your own harness and
> other lighting mods 
> > people do. Good
> > discussion on picking relays and wire sizes. I
> think this should 
> > have been
> > stock from Ford. You NEED full voltage at the
> headlamps!
> > http://www.danielsternlighting.com/tech/tech.html
> > .
> > .
> > .
> > 
> > 
> > 
> > > I'd like it
> > > thanks
> > > Ian
> > >
> > > --- Kevin & Cheryl Airth
> <clubairth@peoplepc.com>
> > > wrote:
> > >
> > > > Bob:
> > > >  There is a wiring mode you can do which will
> keep
> > > > the Light out monitor
> > > > working for everything except the headlamps.
> You
> > > > should be able to see if
> > > > those are still working! Let me know if you
> want it
> > > > and I will post it. It's
> > > > a pretty simple mod.
> > > > .
> > > > .
> > > > .
> > > >
> > > > > This upgrade does light the "light out"
> light. I
> > > > have a black interior so
> > > > I
> > > > > took a triangle shaped piece of rubber
> roofing [no
> > > > reason, had it lying
> > > > > around]  and stuck it to the corner of the
> dash
> > > > with double side tape.
> > > > Can't see the
> > > > >  light and the rubber piece is
> inconspicuous.
> > > > >
> > > > > Bob 93 MTX
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> > 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com