[Shotimes] criuse control cable

[Donald Mallinson]

Yes, it happened to my '89 when I first got it.

I solved it by drilling a tiny hole through the plastic end 
just behind where it snaps on the stud, and putting in a 
small cotter pin to prevent it from coming back off.  You 
could also use a safety wire or some sort of wire.

This has held for about 11 years.

Don Mallinson

Mike Wojton wrote:
> My cable keeps coming unhooked from the throttle cable bracket.  It
> seems to snap on ok, not loose, but when I check it after a couple
> days it is off again.  I haven't done a quantative study yet to
> determine exactly how many uses of the throttle cause it to fall off,
> but has anybody run across this before?  Should there be some kind of
> clip to hold it on once it's snapped on?
> 
> 
> Mike Wojton
> Toledo, Ohio
>  
>    -'95 White MTX
>       '96 Brake Upgrade
>       Eibachs (front)
>  
> "Avoid the clap." - Jimmy Dugan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes