[Shotimes] Problem Pinpointed

[Kevin & Cheryl Airth]

Mike:
 I think Ron's idea about the connectors is a good one. I have had the CCRM
fuel pump relay fail also. I am sending you instructions on installing the
external relay. Works fine and I have run it like this for over 2 years!
.
.



> Well, after much diagnostic work, I have pinpointed
> the cause of the stalling on the 93 ATX.
>
> For some reason, the fuel pump relay in the CCRM is
> cutting out.  After it goes out, it starts working
> shortly after, 2-3 mins.  This makes me beleive that
> there is some sort of heating problem in the relay.
>
> Now, for the repair....  Options
>
> 1. new CCRM
> 2. open the CCRM and repair the relay
> 3. wire a new relay for the fuel pump externally
> (through CCRM wiring)
>
> If the relay is external, will it interfere with the
> function of the CCRM?
>
> From looking at the wiring diagrams, I think it will
> work, just want to get the experts' opinions on what
> the best course of action is....
>
> Thanks,
> Mike
> 95 MTX