[Shotimes] true dual exhaust

[Kevin & Cheryl Airth]

Ron:
 I have read that too and never understood it! Did Vadim even look at it or
was it like the 3.2 L engine won't fit the MTX car statements? Look at the
stock ATX setup! The pipe does not even bend, it just sticks right into the
top of the converter on the back bank of cylinders. Ted B. pointed this out
real early!
.
.



> Interesting comment, in that the analysis way early on by Vadim and the
two
> Dougs was that the ATX Y-pipe was MUCH better than the MTX y-pipe from the
> factory. They were in no hurry to develop an ATX y-pipe, and IIRC the
power
> claims for the ATX aftermarket Y-pipe showed less of an increase than
> putting a y-pipe into an MTX.
>
> It would be hard to have a y-pipe worse than the stock MTX pipe, with the
> 90-degree bend into that restrictive section of pipe off the rear head!
>
> Ron Porter

>
> The ATX has a very poor stock
> Y-pipe design (much worse than the MTX!) and I would upgrade that and just
> use the cat back Dyno max system.