[Shotimes] Exhaust Flange Removal
Leigh Smith
leighsm@comcast.net
Mon, 29 Nov 2004 22:45:18 -0500
Pretty sure I used a deep metric socket on all four of mine, had to vary the
extension length from medium to very long. If rusted try PB blaster, Even
stronger is Mopar brand rust remover, the rust literally melts off! I also
use a propane hand torch on stubborn bolts, get it red hot, and it should
come off easily.
Lee
94 MTX
----- Original Message -----
From: <frank.sappy@comcast.net>
To: <shotimes@autox.team.net>
Sent: Sunday, November 28, 2004 6:58 PM
Subject: [Shotimes] Exhaust Flange Removal
> I'm in the process of installing a new clutch on my 93 SHO MTX. I've
removed 3 of the exhaust flange bolt nuts and am having difficulty getting
at the fourth one which is the upper nut toward the passenger side of the
car.
>
> Are there any tips to getting this nut off without breaking something?
>
> TIA
>
> Frank S.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes