[Shotimes] Sho Shop y-pipe w/cats
Jason Hartberger
Jason Hartberger" <at3hartberger@mail.com
Sat, 23 Oct 2004 18:06:42 -0400
isn't it fairly important that the cats go in the right way? I mean... if
you have the exhaust going through the three different reactors in the wrong
way, the chemical process gets reversed, and is made useless.. you can put
salt into the stew, but you can't take it back out... not by reversing the
process, anyway. And, also, isn't their heat-shielding aluminum wrapper
stuff on the exhaust trough over the cat to shield the body from the heat of
the cats? on my cats (stock), the metal heat-shield is on the bottom of the
cats, and it has saved my hand many a time... just throwing in my .2 dime
here...
Jason
----- Original Message -----
From: <cmichaelo@optonline.net>
To: "Ed Cizmar" <ecizmar@earthlink.net>
Cc: <shotimes@autox.team.net>
Sent: Saturday, October 23, 2004 5:41 PM
Subject: Re: [Shotimes] Sho Shop y-pipe w/cats
> Ed,
>
> I'm about to do the same exact install.
>
> Btw, I didn't get any installation instructions.
>
> I inspected the cats but didn't find any indication of directionality. So
> I am not installing them in any particular direction.
>
> Wrt the heat shield, I don't know what the purpose of it is. So again, I
> was gonna make it point up, for no other reason than to increase ground
> clearance a little bit.
>
> But please don't take advice from me. As I mentioned above, I'm guessing
> my way through both of your questions...:)
>
> Michael
> 94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
> SHO items for sale: http://hometown.aol.com/cmichaelo/for_sale.html
>
> ----- Original Message -----
> From: Ed Cizmar <ecizmar@earthlink.net>
> Date: Saturday, October 23, 2004 1:11 am
> Subject: [Shotimes] Sho Shop y-pipe w/cats
>
>> I will be installing the y-pipe tomorrow, I noticed that the cats
>> didn't show
>> an arrow indicating exhaust flow. Sho Shop instructions say to
>> make sure arrow
>> points back for the exhaust flow.
>> As both ends of the cats are the same, does it matter ?
>> The cats have a heat shield only on one side, I was going to
>> install it with
>> the shield UP to prevent heat from penetrating UP as per the SHO FAQ
>> write-up.
>> Would appreciate your comments.
>>
>> Ed
>> 91 Mocha
>> _______________________________________________
>> Shotimes mailing list
>> Shotimes@autox.team.net
>> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes