[Shotimes] Re: Checking Engine Codes

[Carl Prochilo]

JB

Static codes would mean those codes that were stored from previous
driving.  My advice is to get the KOER to work correctly and give you all
"1"s.  Then make sure you clear the codes.  Then drive the car for a few
days and do a KOEO test again and see if it still catches the same code.

-- 
Cheers,
Carl Prochilo
92 Ultra Red Crimson

On Fri, October 29, 2004 12:48 pm, Beisler Jonathon said:
> Carl,
>
> That code only came when the engine was off.   When I ran the KOER I only
> got the operator error ones.  What do you mean by static codes?
> Thanks,
> JB