[Shotimes] glue and amperage for LED tail lamps

[van Oss]

Yes, to make 3-way sequentials work nicely, you'd want a really slow flash 
rate.

In my SHO, I believe all three functions will be sequential -- turn, hazard, 
and stop (stop sequences only once when you first step on the brake, then 
stays on solid).

So a Heavy Duty flasher would be slower?

VO


----- Original Message ----- 
The stock wiring should be fine but you will need to
resolve the flash rate issue.  The stock Taurus is
only set up for 2 lamps per  side so for ease of
installation and wiring, I chose 2 LED assemblies per
side as well. Are you going to modify which lamps
flash for the turn signal/hazard circuit or?

Bill Murray was looking into a HD 3 prong flasher that
may work with the LED's. I'm still waiting to hear his
results. Good luck-I still need to create a writeup.
:)

Ian