[Shotimes] Gen II AC... Now CAN Handle The Heat

[Kevin & Cheryl Airth]

Pete:
 To access the adjustment screw remove the low pressure switch plug. The
adjustment screw is in-between the 2 blade connectors the plug attaches to.
>From the factory they usually have a dab of glue or sealant to lock the
screw and keep it from turning.
 So you have to adjust the screw then put the plug back on and test the
system. It will take several attempts.
.
.

> That being said I would still like to tweak it with
> the low temp switch. I was looking at it yesterday,
> but
> didn't have a light and could not see the adjusting
> screw on top of the low pressure switch. Is it next to
>
> the 2 wires that go to the switch? Thanks.
> -Pete
> Finally NOT Sweating in My SHO In Tampa